Electronics Engineering Lab Equipments

Digital Traniner Kit

Features:

1. 16 Logic Level Inputs & 16 LED for output indication.
2. Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz.
3. Dual Logic Pulsar, Logic Probe, SPDT Relay, Buzzer, Bar LED display, DPM for Voltage & Current, Potentiometers of 1K, 1M,
4. Two digit 7 segment display with HEX to 7 segment decoder.
5. Bread Board of 1260 tie points
6. Sine, Square and Triangular output waveform from 0-200Khz.
7. Fixed DC +5V, ±12V power supply.
8. All interconnections are made using 2mm banana Patch cord.

Linear IC Trainer

With an experience of many years, we are manufacturing and supplying wide range of Linear IC Trainer. Offered product is used to measure input & output resistance, slew rate, frequency response, input offset voltage & current and input bias current. This is also tested on various predefined parameters to conform its flawless functionality. Additionally, clients can easily avail this Linear IC Trainer to customers at reasonable prices.

Features:

1. Corrosion resistance
2. Smooth finish
3. Easy to use
4. Highly accurate

Digital Electronic Trainer Kit

Digital Electronic Trainer Kit, is most widely demanded Teaching Equipment. Precision engineered with the latest technology, Digital Electronic Trainer Kit provided by us is well-known for giving high performance. Students can easily understand the concept with this Digital Electronic Trainer Kit.

Features:

1. Corrosion resistance
2. Smooth finish
3. Easy to use
4. Highly accurate

Specifications:

• 7 segment LED display (2 nos.)
• Logic input switches (10 nos.)
• Bounce less Pulsar 1 Hz to 100 KHz TTL clocks.
• Bread Board - 2 Nos.
• Power LED Indication.
• Built in Regulated Power Supply: 5V/1A ,12V/1A DC
• AC Input : 230V AC, 50 Hz, ± 10%.
• Mounted on a Sophisticated Cabinet.

Basic Electronic Trainer Kit

High quality Basic Electronic Trainer Kit is offered by us. This Basic Electronic Trainer Kit is feature packed with the latest advancements. Perfectly fabricated with the highest grade components, Basic Electronic Trainer Kit provided by us is known for its high performance and accurate results.

Features:

1. Completely self-contained stand alone unit.
2. Built in IC based DC regulated power supply.
3. Test points provided on panel at various stages in the circuit.
4. Strongly supported by a comprehensive instruction manual complete with theory and operating details.
5. Set of required number of Patch cords.

Specifications:

• D.C. Power Supply : +5 Volt / 1 Amp fixed output + 15Volt / 500 mA fixed dual output 0 to +15V / 500 mA variable dual output
• A.C. Power Supply : 6V, 12V, 18V at 50 Hz @ 0.3 Amp
• Sine / Square/Triangle : 1 Hz to 100KHz with 0 to 10 V peak to peak
• Clock : 0.1Hz to 100KHz to monitor logic signal propagation.
• Pulser Switch : 1 no. of debounced switch with push to 1output
• Built in Regulated Power Supply: 5V/1A ,12V/1A DC
• In-built Digital Voltmeter and Ammeter.
• Bread Board : A large size Bread Board with 2420 tie points
• Speaker : 8-ohms speaker is built in for audio use.
• Potentiometers : 6 nos. of potentiometers values between 100Ohms to 20K
• Front Panel : High finish alpine wood cabinet and printed
• Power : 230V + 10% 50 Hz

Instrumentation Trainer Kit

Instrumentation Trainer Kit, that we make available, is used for understanding various concepts in an easy manner. Made with top quality components, Instrumentation Trainer Kit offered by us is precision engineered for excellent functionality.

Features:

1. Completely self-contained stand alone unit.
2. Built in IC based DC regulated power supply.
3. Test points provided on panel at various stages in the circuit.
4. Strongly supported by a comprehensive instruction manual complete with theory and operating details.
5. Set of required number of Patch cords.

Specifications:

• 2mm BS-4 Jack Terminal for Various Test Point.
• Power LED Indication.
• In-Built Digital Indicator.
• Analog Output: 0 to 1000mV.
• Built in Regulated DC Source.
• AC Input: 230V AC, 50 Hz, ± 10%.
• Mounted on a Sophisticated Cabinet.

OP AMP Training Kit

OP AMP Training Kit is fully loaded with the latest features. Perfectly fabricated with the highest grade components, OP AMP Training Kit provided by us is known for its high performance and accurate results. Students find it easy to understand the concepts with our OP AMP Training Kit.

Features:

1. Completely self-contained stand alone unit.
2. Built in IC based DC regulated power supply.
3. Test points provided on panel at various stages in the circuit.
4. Strongly supported by a comprehensive instruction manual complete with theory and operating details.
5. Set of required number of Patch cords.

Specifications:

• AC Power Supply : 15 . 0 . 15 V AC.
• DC Power Supply : Fixed : ± 5 Volts @ 1 Amp. , ± 12 Volts @ 1 Amp 1.2 to ±15 @ 1 Amp Variable DC
• Built In Op-Amp ICs: 741.
• Built In Digital meter 3.5 Digit.
• Clock Generator : Range : 1 HZ to 10 KHz.
• On Board : Potentiometers - 1K , 4.7 K , 10 K , 47 K , 100 K Ohm to 470 K Ohm.
• AC Input : 230V AC , 50 Hz , ± 10%.

Process Control Trainer

Process Control Trainer offered by us is known for high performance and is very easy to understand. The set up of our Process Control Trainer consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation.

Features:

1. Water Circulation Closed loop.
2. Compact & stand-alone set up
3. Powder Coated Painted structure
4. Simple to operate & maintain

Specifications:

• Pump : ½ HP Centrifugal Pump.
• AC Motor : ½ HP 230V AC.
• Measuring tank : 40 Ltrs. Made of MS with FRP Lining and fitted with piezo meter tube & scale.
• Piping & Fittings : GI/PVC with necessary Valves.
• Control Unit : PID Controller.
• Fitted with DP Transmitter, Capacitive type Level Transmitter, Temperature Transmitter with PT100Sensor, Pressure Transmitter, Pneumatic Operated Control Valves, I/P Converter, P/I Converter,Thyrister Drive for Heater Control, Pressure Gauges.
• Control panel : 1HP DOL Starter. Digital Timer. MCB Load and Line Indicator.

Required Utilities :

• Electric supply Provide : 230 +/-10 VAC, 50 Hz, Single phase
• Electric supply with proper earthing. (Neutral . Earth voltage less than 5 VAC.)
• E5A,Three pin socket with switch for pump. Water supply Tap water connection ½. BSP
Read more